Chat with us, powered by LiveChat
How to Clean Soapstone and Other FAQs

How to Clean Soapstone and Other FAQs

How to Clean Soapstone and Other FAQs

Ask The Experts

How can the Stone Care Experts help you? Just Ask the Experts or visit us on Facebook and Twitter. Meanwhile, here’s a compilation of recently asked questions and answers:

Q: What’s the difference between Granite Gold Daily Cleaner® and Granite Gold Clean & Shine®?

A: The difference between the two is convenience. Granite Gold Clean & Shine® fuses the strength of Granite Gold Daily Cleaner® with luster of Granite Gold Polish® for those with on-the-go lifestyles and those who need to quickly clean and polish before guests arrive. Granite Gold Daily Cleaner® does, however, provide a deeper clean and it can be followed up with an application of Granite Gold Polish® for additional shine and luster.

Q: For the past six years since the installation of my travertine flooring I have been dealing with the tiles pitting, anywhere from a pencil eraser size to the size of a quarter. I also have long spider cracks in several tile. Over the course of those six years I have had a technician come out to “fill” the holes. I was told that this pitting was only temporary and should subside after a year. It is now almost seven years and it continues. Does this problem sound normal to you or are my suspicions that I may have a batch of bad tile a possibility?

A: We wish we had an easy solution for you. What you’re dealing with is, unfortunately, the nature of travertine. It comes naturally with holes/pits, which are typically filled in with grout.

Q: What do you recommend for daily or weekly cleaning of a marble shower?

A: For showers, if you’re sealing and polishing the stone often, you shouldn’t have to clean it daily. By building a protective barrier, you will be preventing build-up from attaching to your stone.  Please make sure you’re not polishing the shower floor, or any stone floor surface. It will make the floor too slippery. Here are some tips on maintaining natural stone in showers and baths:

Q: What product do you recommend for my travertine floors?

A: For your travertine floors, we have Granite Gold Stone & Tile Floor Cleaner®, which is a long-lasting concentrate, and Granite Gold Squeeze & Mop Floor Cleaner®, which is a ready-to-use formula with convenience in mind. With both, neither will leave streaks and you don’t have to rinse. Always remember to reseal stone floors.

Q: What is best type of brush to clean natural stone – granite and travertine?

A: We recommend using a nylon brush, which comes with the Granite Gold Grout Cleaner®, or the Granite Gold Scrub Sponge®

Q: Does Granite Gold have any disinfectant properties at all? I would like that a lot.

A: Be wary of common household cleaners that contain disinfectants. They can damage granite and other natural stone, leading to costly repair and replacement. Granite Gold Disinfecting Wipes® are the only EPA-approved wipes for sealed stone surfaces. An important reminder about any disinfectant is to let it sit on the surface for at least five minutes for it to take effect. Don’t wipe away the residue right away; let the disinfectant do the job. After that, rinse with potable water or Granite Gold Daily Cleaner®.

Q: We have crema marfil marble flooring. I sprayed parts of the floor to kill ants with a bathroom cleaner and it stained the marble. I tried to clean it with baking soda paste, also with peroxide to no avail. What can I use to remove the stains? PLEASE HELP!

A: It’s very likely your stone is etched. A restoration specialist with the right tools and training can restore your stone.

Q: Is your Granite Gold Polish® good for polishing soapstone counter tops?

A: We recommend regular treatment with mineral oil to maintain the appearance most admirers of soapstone are accustomed to. Meanwhile, you can use Granite Gold Daily Cleaner® on soapstone for regular cleaning.

Q: Are any of your raw materials, ingredients or finished products tested on animals at any stage of development, manufacturing, production, or quality assurance and control?

A: Great question! No, we do not test on animals during any stage of production.

Q: We had granite installed yesterday. The surface color is rich and shiny. The edges are washed out and dull. The fabricator is telling us that this is not unusual and is due to the particular granite slab we chose. I have never seen this before and am upset by the look.

A: Most granites have a resin vacuum sealed into the stone to fill all the minute fissures.  This gives the face of the stone a darker appearance.  The edge detail is done in house by the fabricator and is actually the natural color of the stone.  We recommend the fabricator apply a product by Tenax called Ager that will darken the edge to match the face of the stone as closely as possible.

Q: I left a  12″ glass frying pan  lid on the (granite) counter overnight. The lid had condensed water under it, and in the morning there was a  perfectly round  12″ dark (well darker than the original granite) stain on the counter top. Help!

A: That’s certainly a warning sign that your stone needs to  be resealed. The good news is that if it’s only water from the lid, it should evaporate. If there’s any other residue, it could be an oil stain.  Here’s what you can do to remove an oil-based stain:

  • Mix baking soda and acetone to the consistency of pancake batter; apply the  poultice directly over the stain; let it sit overnight, then  lift  it off the stain.  You should notice an immediate improvement, and it may require a couple attempts.  If the stain is too deep, you may need to call a restoration specialist. Following either scenario, you should immediately re-seal the stone, followed by polishing 24 hours later.

Comments are closed.

Blog Comments
Avatar for Territa

I have a porcelain brown sink that is dull looking. Can I use granite gold polish on it?

Avatar for Stone Care Experts

This may require a professional restoration specialist. Please send pictures of your challenge to so we can try to assess the situation for you.

Avatar for Kevin

I just had my first granite countertop installed. I’ve read your 3 step process of clean, seal and polish. My question is will using the daily cleaner require that that counter top be resealed each time? I can understand maybe polishing after cleaning but to reseal every time would seem to be a hassle since you have to wait 24 hrs before polishing.

Avatar for webmaster

No, you do not need to seal after each cleaning. Here’s how to find out when it’s time to re-seal: Pour water (about 3 inches in diameter) on the surface and let it sit for 30 minutes. Be sure to do this in several locations, since the integrity of the seal could vary from one area to another. If the water beads, then the stone remains sealed. However, if the stone is penetrated – look for a dark mark or ring created by the water – it is time to reseal. Check for etching and stains as well before sealing your stone surfaces. You’ll want to fix these issues before the sealant is applied.

Avatar for Gordon Soos

When I was sealing my granite I left my rag on a metal stand that discolored from the rag. Is there anything I can do to remove stain.
Gordon Soos

Avatar for webmaster

Is the stain on the granite or the metal stand?

Related Blogs

How to Get Rid of Cloudiness on Granite Countertops San Diego, CA
Posted by saba-webmaster | 11 October 2019
Granite flooring and countertops look great, particularly if the stone has been honed and polished to a glossy finish, but when a cloudy film forms on the surface, you get…
2 LikesComments Off on What Should I Do About Cloudiness on My Granite Countertop?
Overview of Prefab Countertops San Diego, CA
Posted by saba-webmaster | 09 October 2019
Open floor plans that merge family rooms with the kitchen continue to be very popular among homebuyers in 2019. According to national home builder Lennar, this preference for open floor…
3 LikesComments Off on All About Prefab Countertops
Removing Dry Grout Between Stone Floor Tiles San Diego, CA
Posted by saba-webmaster | 04 October 2019
Grouting is part of natural-stone tile installations. The only way to avoid it is by opting for joined panels instead of tiles, and this isn’t recommended for flooring applications. Contractors…
8 LikesComments Off on How to Get Rid of Dried Grout on Your Stone Floor Tiles